Trex Rocking Chairs – When the good weather arrives we like to have our garden ready, and there is no better way to relax in your favorite place. That could be a hammock, an armchair for outdoor or, why not, a wooden rocking chair. Choose the chair in your garden where you feel most comfortable to use it for this job. Next, measure the distance from one leg to the other on the side of the chair.
Once the measurement is done, acquire a wooden board long enough and wide enough to be able to curve the lower sheets when cutting them. They have to measure twice the size of trex rocking chairs one leg to the other. Next, draw in pencil the simulation of one of the plates. Help yourself with bodybuilder’s tape to create the necessary curve. Use a jigsaw, with a specific saw blade depending on the wood to cut following the pattern you created in the previous step.
Then, trace the other sheet bordering with the pencil the cut you just made. With medium grain sandpaper, remove all the imperfections of both sheets. Turn the trex rocking chairs over on a level and suitable place to work at your height. Place each of the plates on the bottom of the legs. One more third part of the sheet must always protrude in front of the chair than in the back.